Skip to content
Free UK Mainland Shipping On orders over £50 - Browse our January Sale - 0151-236-7800
Free UK Mainland Shipping On orders over £50 - Got a question? Give us a call on 0151-236-7800

Full Fat Audio FFA-2004 DSP Power Amp4 x 500W 4 Ohm

£3,504.00 inc. vat
£2,920.00 ex. vat
SKU SFUL2004DSP
Please contact us for availability.

Full Fat Audio FFA-2004

The Full Fat FFA-2004 G2 DSP amplifier's provide a cost effective solution for sound system design.Ideal for permanent installation or temporary sound. The DSP software has been designed to be functional and quick to use and has a familiar feel to that of a mixing console. The software runs on all platforms - PC or MAC/ IPAD based software. The DSP is accessed by Neutrik Ethercon and connected using an Ethernet network direct to a personal computer (MAC/ IPAD or PC) or via an Ethernet Hub or wireless router.

The DSP has 4 analogue audio input’s or 1 pair of selectable AES/EBU digital inputs. There are 6 analogue audio output channels - 4 assigned to the FFA-2004 power amplifier and 2 assigned to a pair of male XLR connection on the rear panel of the amplifier. These extra processed outputs could be used to design a 3 way stereo system of bass, mid and high frequency where the 2 outputs drive a 2 channel bass amplifier or used as a 2 channel DSP for any signal that requires control.

Full Fat Audio FFA-2004 Features

  • Exceptional sound quality
  • G2 DSP option
  • Mains power efficient and cool running
  • Rugged Tour class Aluminium construction
  • Light weight - 9 kg
  • FFA Class D PWM
  • High current switch mode power supply
  • Superb limiter
  • 4 XLR analogue audio inputs
  • 4 XLR parallel outputs.
  • Bi amp Neutrik® speakON outputs
  • Signal Link through
  • Neutrik® powerCON power input
  • PSU soft start
  • Hand built & designed in Hertfordshire, England
  • 5 year factory warranty

Specifications

  • Power Ratings: FFA - 2004 - 4 x 250W 8 Ohm load, 4 x 500W 4 Ohm load, 4 x 1000W 2 Ohm load
  • Gain: 32 dB
  • THD: THD Typical 0.03 4 Ohm 1kHz THD+N
  • Frequency Response: 20Hz - 20kHz +- 0.5dB
  • Controls: 40 Point Potentiometer per channel, power on switch
  • Indicators: signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up
  • Load Protection: DC on output, side chain TCA clip limiter circuit
  • Amplifier Protection: Short circuit, current overload, thermal shutdown, high frequency stability circuit
  • Audio Signal Inputs: Balanced Neutrik® Female XLR input connected Pin 1 - GND, Pin 2 - Hot +, Pin 3 - Cold - . XLR Male signal throughput each channel
  • Audio Signal Outputs: Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system for example stage monitor system
  • Power Requirement: 1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC, 120V (configured at factory)
  • System Cooling: High CFM 80mm fan with proportional signal speed control. Rear to front airflow
  • Dimensions: 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19" rack mount enclosure
  • Weight: 9 kg