Klotz & Neutrik 1m Dual Phono to Jack Cable - Klotz IY205 Cable and Rean NYS373/Neutrik NP2XB Plugs

Klotz & Neutrik 1m Dual Phono to Jack Cable

The Klotz & Neutrik 1M Dual Phono to Jack Cable is constructed from high quality cable and connectors, The Klotz IY205 cable work between temperatures of -20°C / +70°C and have a bending radius of 20mm allowing you to make use of this cable in even the most cramped studio setups. The Neutrik and Rean connectors are lightweight yet rugged providing you connectivity you can expect from professional audio cable.

Specifications

Klotz IY205

• Cond. construction: stranded bare copper, 7 x 0.20 mm
• Cond. cross section: 0.22 mm2
• Core insulation: polyethylene (PE)
• Single core shielding: bare copper spiral shield
• No. of cores: 2
• Core arrangement: parallel, separable
• Outer jacket: PVC, matt
• Dimensions: 5.0 x 10.0 mm
• Min. bending radius: 20 mm
• Working temperature: -20°C / +70°C
• Conductor resistance: < 85 Ω/km 
• Cond. / shield: 130 pF/m
• Insulation resistance: > 1 GΩ x km

Neutrik NP2X-B

• Contact resistance: Depends on mating connector mΩ
• Dielectric strength: 1 kVdc
• Insulation resistance: > 2 GΩ (initial)
• Rated current per contact: Depends on mating connector A
• Rated voltage: < 50 V
• Cable O.D.: 4 - 7 mm
• Lifetime: > 1000 mating cycles
• Wiresize: 1 mm²
• Wiresize: 18 AWG
• Wiring: Solder contacts
• Bushing: Polyacetal (POM) + PU
• Contact plating: 0.2 µm Au
• Contacts: Brass (CuZn39Pb3)
• Insert: Polyamide (PA 6.6 30 % GR)
• Shell: Zinc diecast (ZnAl4Cu1)
• Shell plating: Black chromium
• Strain relief: Polyacetal (POM)
• Standard compliance: IEC 60603-11 / EIA RS-453
• Solderability: Complies with IEC 68-2-20
• Temperature range: -20 °C to +65 °C

Rean NYS373-2

• Dielectric strength: 0.5 kVdc
• Insulation resistance: ≥ 1 GΩ
• Rated current: Depends on mated connector
• Contact resistance: Depends on mated connector
• Cable O.D.: 3.5 - 6.1 mm
• Lifetime: > 1000 mating cycles
• Wiresize: 24 AWG
• Contact plating: Au
• Contacts: Brass (CuZn39Pb3)
• Shell: Zinc diecast (ZnAl4Cu1)
• Shell plating: Black
• Strain relief: Internal plastic chuck
• Insulation: Thermoplastic
• Solderability: Complies with IEC 68-2-20
• Temperature range: -25 °C to +70 °C