Klotz & Neutrik Bantam Jack to 6.35mm Balanced Jack Socket Patch Cable 1m Black

Klotz & Neutrik Bantam Jack to Balanced Jack Socket

The Klotz & Neutrik Bantam Jack to Balanced Jack Socket is build using Klotz MY204SW Patch Cable, Neutrik NP3TTP-1-B bantam and Neutrik NJ3FC6-BAG jack socket by out in house service team. The MY204SW is ideal for patch cable, midi cable, stable microphone cable with ultra-low outer diameter. Its braided shield offers superior tensile strength, making the MY204 suitable for uses such as XLR fan-outs or XLR patch panels. The MY204 features a copper drain wire in contact with the braided shield, which can significantly speed up custom cable production.

Neutrik NP3TTP-1-B are assembled using a special crimp tool, which includes a special part to fit the non-removable strain relief. They are available with black or red shells and metal rear bush. Spare coloured shells are type BSTT. Neutrik NJ3FC6-BAG is a 3-pole jack sockets in panel mounted or in-line versions. Panel mount type can be front or reverse mounted (the latch bar must be removed if reverse mounted) in a 24mm cutout. In-line types have cable gland as on ‘X’ series XLR connector, clamping on cables 2.8 to 8.0mm diameter.

Specifications

• Connection Type: Plug
• Gender: Male
• Contact resistance: Depends on mating connector mΩ
• Dielectric strength: 1 kVdc
• Insulation resistance: > 2 GΩ (initial)
• Rated current per contact: Depends on mating connector A
• Rated voltage: < 50 V
• Transmission Performance: Null
• Cable O.D.: 4 - 4.8 mm
• Crimp size: 5,41 Hex crimp (shield) acc. IEC 60803 (die designation D)
• Lifetime: > 1000 mating cycles
• Wiresize: 0,25 mm²
• Wiresize: 24 AWG
• Wiring: Solder contacts
• Bushing: Polyacetal (POM) + PU
• Contact plating: 2 µm Ni (Su)
• Contacts: Bronze (CuSn6) (Tip)
• Insert: Polyamide (PA 6.6 30 % GR)
• Shell: Brass (CuZn39Pb3)
• Shell plating: Polyamide (6 30% GR) (red)
• Standard compliance: MIL-P-642/13
• Solderability: Complies with IEC 68-2-20
• Temperature range: -20 °C to +65 °C