Skip to content
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800
STUDIOCARE REMAIN OPEN & SHIPPING WORLDWIDE, HOWEVER OUR SHOWROOM IS CLOSED - CALL US ON 0151 236 7800

Manley Reference Gold Multi Pattern Tube Microphone

by Manley
£5,090.00 inc. vat
£4,241.67 ex. vat
SKU SMANREFGOLD
In Stock

Manley Reference Gold Multi Pattern Tube Microphone

The Manley Reference Gold multi pattern tube microphones are a statement, quite simply, of the finest microphones that money can buy in the pursuit of truly accurate musical recordings. The Gold Reference Series employ our own design of large capsules (1.25 inch overall, 1 inch diaphragm diameter) which are executed to precise tolerances made possible by modern micro-milling machinery available today in California. The capsule rings and back-plates are milled from solid brass.

The gold diaphragm film comes from Germany and is tensioned using proprietary techniques by David Josephson ensuring capsule-to-capsule constancy, combined with the speed, "air", and superb ultra-high frequency response you have only dreamt about.

The all-tube electronics in the MANLEY REFERENCE SERIES MICROPHONES are built around two triodes in cascade forming an entire gain-block. We have recently switched to a dual-triode 12AX7WA, easily obtainable and replaceable, mounted in a ceramic socket. (We used to use 6072A until it became impossible to find quiet ones out of the NOS dreck left on the market.)

The output is coupled through a MANLEY output transformer of unparalleled quality and substantial physical size employing nickel laminations with "hum bucking" bi-filar windings, encased in mu-metal. The polar pattern control is continuously variable between the OMNI, CARDIOID, and FIGURE 8 positions vastly increasing this mic's versatility. The Gold Mics make it possible to exactly tailor the proximity effect to achieve the desired character.

Gold Reference Microphone Features

  • All Tube design
  • -10dB switchable PAD

Specifications

  • Frequency response: 10Hz-30KHz
  • Sensitivity: 17mV/Pa
  • Noise:typically -120dB EIN
  • Max SPL: 150dB
  • Output Impedance: 250 Ohms
  • Weight: 2.25 lbs (mic)
  • Weight: 2.5 lbs (PSU)
  • Size: 2" x 9.7" x 4.5" (mic including suspension)
  • Size: 5" x 8.2" x 3.4" (PSU)
  • Shipping weight: 15 lbs
  • Mains Voltage Frequency: 50~ 60Hz
  • Mains Fuse: 250mA @ 100~120V; 125mA @ 220~240V operation
  • Power Consumption: 70mA @ 120V = 8.4 Watts